Nordtek

 

SOLAR Solarium 65-220W

Return to normal view

Electronic Starter for single 65-220W fluorescent lamp circuits for solariums


The soft start system utilised in the TubeSaver first pre-heats the lamp cathodes in the tube to their working temperature, before applying a controlled voltage pulse to strike the arc. This method of ignition prevents unnecessary damage on the cathode inside the tube and significantly prolongs the lifespan of the tube.

SOLAR TubeSaver also works as a fluorescent lamp safety starter as it has a built in safety monitoring system, which shuts down the system in the event of a fault. This prevents dangerous overheating and the annoying flickering, which is associated with the old-fashioned glow type starters.

Is used:

Solariums and private homes with a sunbed.


Notice:

Disadvantages – None, only advantages!

The TubeSaver

- Ordinary glow starters can immediately and very simply be substituted with TubeSaver. -

Data


 Operating voltage:
 Pre-heat time:
 Operating temperature.:
 Pulse height:
 Safety shutdown:
 For Lamp types:
 Replaces glow type starters:

 200-260V ac 50/60Hz
 approx. 2.5 seconds at 20°C
 0°C to +75°C
 1500V max
 within 3.5 seconds
 65W tube to 220W tube -
see sheet
 S12



See TubeSaver Intro here
See Compatibility Sheet here
See Detailed Explanation here

Top of page